How can I connect to a Trailer ABS system?

There are some special requirements when you connect to the trailer. Check them out!

We know that sometimes inconveniences can arise. Therefore, we have created this step-by-step guide so you can connect to a Trailer ABS system as quickly as possible. You just have to follow the steps mentioned, we have included a video to facilitate solving the problem.

You will need the PLC Adapter cable (Part Number: JDC 112A) if you wish to perform diagnostics on a standalone trailer without needing to connect it to the tractor to provide a power supply.

You also may need the PLC Power Supply Adapter Cable (Part Number: JDC 40AM2, recommended).

Connect the PLC Adapter cable to the corresponding slot.
Then, connect the 9-pin connector in its corresponding location.
In the software, choose the black 9-pin connector button to proceed.

Jaltest Software will perform an automatic scan of the ABS system of your trailer and provide the necessary information, depending on the ABS system.

To learn more about this watch this video:

After you have followed all the steps in this guide, the issue should be fixed and you are ready to continue using Jaltest.

If after following the guide you still need help, you can contact our technical support team at customersupport@cojaliusa.com

Remember that to access certain technical support functions a Jaltest ATS license is required.

We have officially rolled out our Advanced Technical Support (ATS). You may want to inquire about this high-level and valuable technical expertise support from our Jaltest Diesel Technicians!

Check these articles for information:

WHAT IS JALTEST ATS LEVEL I ?

WHAT IS JALTEST ATS LEVEL II ?